Characteristics of machine tool:

1 the machine frame is welded by steel plate, and the stress is eliminated by vibration aging to prevent the deformation of the machine body.

2 the machine is equipped with Japanese MITSUBISHI CNC system, accurate positioning accuracy.

3 all adopt AC servo motor drive, can avoid cleaning brush work, maintenance free.

4 high precision ball screw drive and servo motor drive, high speed and high torque are achieved in Taiwan.

Hydraulic clamp and hydraulic pressure plate using the 5 independent machine, ensure the gouging workpiece firmly, high stability.

technical parameter

Model: PV3200

PV4200

technical parameter

Company

Pv3200

Plate thickness

Mm

0.3-6

Width of working plate

Mm

9-1600

Processing board length

Mm

500-3200

Cutter speed

M/min

11/13/16

Cut in speed

Mm/min

Five hundred

X shaft turret maximum stroke

Mm

Three thousand and two hundred

X axis servo motor power

KW

Three point five

weight

Kg

One thousand and one hundred

Body size

Mm

4400*2400*2080

Standard configuration

(1) CNC system: Japanese MITSUBISHI original system

(2) hydraulic system: hydraulic system of the United States.

(3) linear guide rail: Taiwan on silver

(4) ball screw: Taiwan Silver

(5) servo motor: MITSUBISHI, Japan

(6) electrical part: Schneider, France

(7) plane slot cutter: imported from Sweden

(8) with the arm 4

(9) working lighting

numerical control system

MITSUBISHI CNC system

1 control axis number: 3 axis (X, Y, Z axis)

2 display color: flat color display (640*400 dot matrix)

3 input mode: touch control, dialogue mode input

4 driving mode: using digital AC servo motor

5 position detection: using absolute position encoder

6 absolute / incremental programming

7 metric conversion

8 minimum setting unit: 0.01mm

9 data input: MDI input processing data, simple and quick. As long as the user input number, plate thickness, plate length, V groove depth, the time the amount of feed, automatic calculation and processing.

10 number of stored procedures: 128 (about 6000 steps)

11. Set a number of slots: number is between 1-50, once in a fixture in planing cutting up to 10 of the same depth of the pit; workpiece number for 51-60, in sheet metal planing 20 different depth of groove; workpiece number 81 - 90 can planing 50 at the same depth of the pit.

12 program capacity: 256KB

13 working temperature: 0 C -45

14 room temperature: -60 C -30 C

15 after the block material (Y axis) repeat positioning accuracy: +/-0.05mm